When it comes to finding the perfect combination of style and comfort, lacing Puma Axelion shoes is the way to go. These lightweight running sneakers look great, but getting just the right fit for your feet requires a little preparation be sure to measure your feet before you lace them up!
Not only do they come in several stylish colors, but their breathable mesh upper ensures a comfortable fit that doesn’t get too hot or stuffy during rigorous activities. Here, we will provide an easy-to-follow guide on how to properly lace your new Puma Axelion shoes so that you can maximize their performance and stay focused on achieving your goals!
Getting Started - Prepping Your Puma Axelion for Lacing:
- Ensure your Puma Axelion shoes are free from any shipping or manufacturing defects.
- Gently unlace the factory-set pattern, which may not always be optimal for fit and comfort.
- Ensure there’s no debris or residue in the eyelets. This can make lacing smoother and prevents wear on the laces.
Step-by-Step Guide - How To Lace Your Puma Axelion Shoes:
Prepare The Shoes And Laces:
- Unlace any existing laces if you’re replacing them.
- Lay your shoes on a flat surface, ensuring the eyelets (holes for laces) are aligned and free from obstructions.
- Straighten your laces, ensuring there are no kinks or twists.
Equalize Lace Length:
- Find the middle point of the lace. You can do this by holding both ends together and stretching it out.
- Position the midpoint at the bottom-most pair of eyelets (closest to the toes).
Begin Lacing:
- Insert each end of the lace into the bottom eyelets from the top, pulling both ends through until the midpoint of the lace sits snugly against the shoe.
- The lace should now be running over the top of the bottom eyelets with equal lengths of lace on both sides.
Criss-Cross Lacing:
- Take the left lace and insert it into the second eyelet on the right from the top. Pull it through.
- Similarly, take the right lace and insert it into the second eyelet on the left from the top. Pull it through.
- Continue this criss-cross pattern until you reach the last set of eyelets.
Tightening & Adjusting:
- Start from the bottom, and adjust the tightness of the laces. Ensure they lie flat against the shoe and aren’t twisted.
- For a snug fit, especially important in training shoes, make sure the laces are uniformly tight. For a more relaxed fit, you can loosen them slightly.
Tie A Knot:
- Once you reach the topmost eyelets and have adjusted for comfort, tie the laces in your preferred knot. This could be a traditional bow knot or any other secure tying method.
Final Adjustments:
- Walk around a bit to see if the tightness is just right. Adjust if necessary.
- If there’s too much lace left over, consider double-knotting or cutting off the excess (though remember to melt or cap the ends if you do cut).
Styling Variations - Different Ways To Lace Puma Axelion Shoes:
Straight (Bar) Lacing:
- Starting at the bottom, run the lace straight across the outside and feed them into the bottom eyelets.
- Take the right lace and thread it straight up on the right side, then straight across on the inside.
- Continue this pattern with the left lace, alternating sides until you reach the top.
Loop-Back Lacing:
- Begin with standard criss-cross lacing at the bottom.
- Instead of crossing over, loop each lace back into the same side’s next eyelet, and then cross over to the opposite side.
- This creates a small loop or knot effect at each crossover.
Double Cross Lacing:
- Lace the first two sets of eyelets in a standard criss-cross.
- From there, cross the laces again before moving up to the next set of eyelets.
- This results in two crosses between each set of eyelets.
Ladder Lacing:
- Begin by running the lace straight across the bottom eyelets from the outside.
- Go straight up on the outside and then cross and go down on the inside to create a ladder effect.
- Continue this until the top.
Zig-Zag Lacing:
- Start at the bottom on one side and lace diagonally on the outside to the top on the opposite side.
- Then, go straight across on the inside and diagonally on the outside to the bottom.
- Keep alternating this pattern until the entire shoe is laced.
Hidden Knot Lacing:
- Lace your shoes using the straight (bar) lacing method.
- Instead of tying a bow on top, tie a knot on the inside of the shoe, hiding the knot and the lace ends.
Troubleshooting Common Issues - Solving Lacing Problems in Puma Axelion:
Uneven Lace Length:
Problem:
One lace end is significantly longer than the other after tying.
Solution:
Unlace the shoes and find the middle point of the lace. Start lacing again, ensuring both ends are of equal length when you begin.
Too Tight or Too Loose:
Problem:
The shoe feels too constricting, or it doesn’t offer enough support because it’s too loose.
Solution:
Adjust the tension in the laces. Work from the toe up, ensuring each section is uniformly tightened or loosened to your preference.
Pressure Points:
Problem:
Certain parts of the foot feel pinched or too much pressure due to lacing.
Solution:
Skip an eyelet or use a different lacing technique to redistribute pressure. Sometimes, using a parallel (bar) lacing technique can reduce pressure on the top of the foot.
Laces Keep Coming Undone:
Problem:
Laces often come untied during activities.
Solution:
Double-knot the laces or consider using a different knotting technique. Another solution is to use slightly waxed laces or ones with more texture, as they grip better.
Rapid Lace Wear or Fraying:
Problem:
Laces show signs of wear or damage quickly.
Solution:
Ensure the eyelets of the shoes don’t have sharp edges that could be causing damage. Consider investing in higher quality or more durable laces. Also, avoid pulling laces too aggressively when tying.
Difficulty Tightening Laces:
Problem:
Laces don’t slide easily when trying to adjust tightness.
Solution:
Ensure laces are flat and not twisted during lacing. Waxed laces or ones made of smoother materials may slide more easily.
Maintaining Your Laces - Care and Cleaning Tips for Puma Axelion Shoelaces:
Routine Cleaning:
- Remove the laces from your shoes.
- Place them in a mesh bag or pillowcase and toss them in the washing machine with similar-colored clothing. Use a mild detergent.
- Alternatively, soak them in soapy water, gently rubbing any dirt out. Rinse thoroughly.
Drying:
Always air-dry your laces to maintain their integrity. Avoid direct sunlight which may fade their color.
Storing Extra Laces:
If you have extra pairs, store them rolled up in a dry place to avoid them becoming tangled or damaged.
Replacing Laces - When And How To Change Laces on Puma Axelion Shoes:
When To Replace:
Laces should be replaced when they are fraying, have lost elasticity, have permanent stains, or when the aglets (plastic/metal ends) are damaged.
Steps To Replace:
- Remove the old laces
- Choose a new pair of laces. Ensure they are of similar length to the original ones.
- Insert one end of the lace into the bottom eyelet from the outside and pull it through. Repeat on the other side.
- Follow the preferred lacing style and ensure equal length on both ends before tying.
Lacing Techniques - Advanced Lacing Styles for Puma Axelion
Checkerboard Lacing:
- Requires two different colored laces.
- Start by lacing one color horizontally and the other vertically, creating a checkerboard pattern.
Spiderweb Lacing:
Start at the bottom. Lace one end straight up several eyelets. With the other end, cross over and out through the next free eyelet. Then go diagonally on the inside and out through the next higher eyelet on the opposite side.
Diamond Lacing:
- Begin with a standard cross lacing at the bottom.
- At each crossover, lace out through the next eyelet up on the same side, then cross to the opposite side and down.
Starburst Lacing:
This starts with a center anchor point and radiates out, creating a starburst pattern. Begin at the bottom middle eyelet and thread outwards, then pull both ends diagonally up to the next set of eyelets on opposite sides.
Conclusion:
After following these steps, you should now have perfect laced and tied Puma Axelion shoes! The way that you decide to lace up your shoes is important for making the sizes work best in order to be comfortable and supportive throughout a long day. With the lacing techniques provided in this post, you can take the styling of your shoes into your own creative hands. One day these different styles can be used as unique fashion statement pieces from sports stars or celebrities alike, showcasing their individual personalities through lacing patterns on their feet!
